woman

How to Do DIY Styles (Bob, Ponytail, and More)

Express weaves have emerged as a fashionable way to lengthen, thicken or completely transform your natural hair. They are often a better alternative to traditional fabric (for example, sewing weave), which take hours upon hours to install.

People all over are experimenting with the method. Whether you’re intimidated by the quick fabric installation process or you’re looking for tips for a clean, beautiful installation, you’ve come to the right place.

We will give you step-by-step instructions on how to achieve an amazing quick weave at home.

What is quick knitting?

Express knitting, which can last up to 4 to 8 weeks, is a weave fitting method that uses a wig cap and hair-binding glue to secure the hair wefts to your head.

The installation time of quick knitting is much shorter than that of traditional knitting, which is why it is so popular. is similar to weaves in sewA quick weave can be done from virgin human hair, synthetic hair, or a combination of both.

How to do a quick weave: the step-by-step hair installation process

Although the quick weave is easy to do, some people find it difficult to get it right. Use the information in the following sections to make sure your weave goes off without a hitch.

Gather your supplies

Before you start your fast weave, you must gather your supplies. Make sure these items are on your supply list:

Hair extension for fast weave

You have two options to choose from for this style: human hair wefts and synthetic hair wefts. Human hair wefts, of course, are made from hair cut from humans. It is reusable and looks completely natural.

On the other hand, synthetic hair is man-made, it does not look as natural as human hair, and it can rarely be reused. For these reasons, the cost of human hair is several times higher than that of synthetic hair.

Most people choose human hair if they can afford it – it’s ultimately the best hair available, making it a better option overall. Also, some of the less expensive options are prone to clumping and poor quality, which often leads to poor results.

Prepare your natural hair

Many fail to realize that natural hair must be prepared before applying it in a protective style. Doing so not only helps keep your hair healthy during and after fixation, but it also makes the styling process easier.

Here we will tell you exactly how to prepare your hair for a quick weave.

Wash, conditioner, and deep conditioner

First, wash your hair well to remove all dirt and debris. Use our natural purifying shampoo with oils and nutrients for best results.

Follow up with a moisturizing conditioner that helps compensate for the moisture loss that often occurs during the shampooing process.

While the conditioner is in your hair, detangle it well with a wide-tooth comb.

If your hair is dry, a deep conditioner may be exactly what you need to restore your hair’s hydration levels.

A deep conditioner that contains nourishing moisturizers and penetrable oils that will leave your hair soft and resilient. You can apply it after shampooing or even after using a rinsing conditioner.

Apply leave on hair and dry it

After your hair is deeply moisturized, you’ll be ready to apply leave-in. click here Read our step-by-step deep conditioning guide. If you have thick or coarse hair, a leave-in cream might be perfect for you.

If you have fine or thinning hair, a lightweight, water-based formula will do the trick. The drying step is optional, but you may want to do it anyway because it reduces the drying time.

And if you stretch your hair while it’s drying, it will be easier to braid it. Before applying any heat to your hair, be sure to use a heat protectant.

Braid or smooth your hair down

To make sure that the wig cap will rest on a smooth surface, you should straighten or straighten your hair. This step doesn’t have to be complicated.

You can braid your hair straight back and flip the ends of the braids up. Use the needle and thread to secure the ends of the corn if necessary.

Alternatively, you can use a shaping gel and a bristle brush to smooth your hair toward the back of your head.

In this step, you will decide if you want a side part, a medium part, or a deep side and whether to leave any of your hair out. If you are going to have any hair left, divide it and then braid it in three strands to keep it separate.

Put on a wig cap

Once your hair is braided or smoothed, you are ready for it Apply your wig cap. Spread it all over your hair. Make sure none of your natural hair is sticking out from the cap.

The purpose of the cap is to create a barrier between your hair and the glue that will hold the extensions onto the cap. Some wore wig caps to make sure your hair didn’t come into contact with the glue.

Once the wig cap(s) are on, spray the cap liberally with got2b adhesive spray for an extra protective barrier. Make sure the cap is completely covered with spray.

Install the extensions

This is arguably the most complicated part of the installation process. Follow the steps below to make the process easier:

  1. Untwist one of your hair bundles and cut a piece the same width as the back of your neck.
  2. Apply hair bonding glue to the weft and let it stay sticky for up to 30 seconds. You can tumble dry the meat to aid in the process if you wish.
  3. Place the weft on the wig cap at the back of your neck, avoiding your skin.
  4. Repeat the previous steps all over the wig cap – measure and cut the wefts, apply bonding glue, and place the wefts on the cap. Tape the wefts so that they go horizontally around your head.
  5. Clip off the excess wig cap and discard the area of ​​your natural hair that you will have left.
  6. Styling as desired.

In general, the process should not take more than an hour or two.

What to do and what not to do with quick fabric fitting

Many things can go wrong during a fast fabric installation process. To prevent a hair disaster, here are some tips to keep in mind.

dos

  • Measure the weft hair before cutting it.
  • Be patient: let the cover dry before Install extensions Give each weft some time to dry before moving on to the next.

no

  • Don’t forget to spray got2b hair glue on the fabric cap before installing the extension wefts. You can get glue on your hair if you skip this step.
  • Don’t cut the wefts more than you need to because the more you cut them, the more shedding you’ll feel.

How to maintain a fast weave

After you’ve finished your quick weave, you’ll need to take adequate care of it, or else it won’t last a full four weeks. Here are some tips you can use to keep your quick weave looking great:

  • Cover your hair at night to prevent it from getting tangled and frizzy prematurely. You can use a silk scarf, a satin bonnet, or your favorite nighttime wrapping method.
  • Gently detangle your hair daily with a wide-tooth comb.
  • Only use low heat tools (like a hair dryer) on your quick weave to avoid burning hair.
  • If you need to wash your weave quick, do so gently. But do not over-wash it, as this can reduce the longevity of the hairstyle.

conclusion

The quick knit hairstyle isn’t a new trend, but it has continued to accelerate in popularity. Whether your hair needs some extension, thickness, or a total transformation (say, a curly weave) to make it look just right, this DIY guide will help you achieve salon-quality results at home.

Although there are many steps for a quick weave, this pattern takes less time to install than other weave patterns. Your first quick DIY weaving can be tricky, but we guarantee it will get easier over time.

Plus, with our helpful tips included at every stage of the installation process, there’s nothing left but for you to get started on your new look today! Good luck and God bless you!

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button