DIY Install, Pros, Cons, & More

Micro bonding (or micro bonding) has become increasingly popular in the natural hair community over the past few years. You’ve probably seen someone with them without even knowing it.

If you want to try microlink Wig Extensions But you’d rather skip the expensive installation appointment with the designer, this guide is for you.

We will tell you step by step how to make micro bonding at home like a pro.

What are Microlinks?

Microlinks are a type of hair extension where the extension is attached to individual hair strips using tiny silicone beads (like microbeads). Microlinks (also called microlink Wig ExtensionsThey last for several weeks before they need to be removed or reattached.

One of the main advantages of micro ties is that they are almost impossible to detect after installation (when installed correctly), creating the perfect blend between your real hair and extensions.

How Microlinks Work: Step by Step

Now that you know a little bit about what microlinks are and how they work, let’s get into how microlinks work step by step. With the instructions below and some practice, you will be able to make precise bonds on your hair quickly and easily.

Buy your supplies

It is essential to make sure you have everything you need before you begin. Here are the supplies you’ll need for the patterns.

Wash, conditioner, and deep conditioner

Start with a thorough shampooing with a sulfate-free moisturizing shampoo. The shampoo will get rid of dirt without stripping your hair of all its natural moisture.

If you have visible buildup, shampoo it out twice. After your hair is clean, move on to the conditioning step. Apply the moisturizing conditioner all over your hair, paying special attention to the ends, which are usually the driest.

Use this time to detangle your hair with a wide-tooth comb – the gliding of the conditioner will make detangling a breeze.

For normal, ultra-dry hair, a deep conditioning treatment May be necessary – in this case, follow the instructions on the deep conditioner package.

Post-wash preparation

After washing your hair with shampoo and conditioner (or deep conditioning), work up your leave-in conditioner and apply it to each strand of your hair. Feel free to comb through evenly with a wide-tooth comb.

This step will give your hair an extra layer of moisture to protect it during and after the styling process.

Now that your hair is wet enough, it’s time to blow-dry and stretch your hair. All you need to do in this step is to apply a file Favorite Heat Protector And dry your hair with a dryer.

Use your fingers or a wet brush to stretch your hair and promote elongation. If you need to separate your hair into several sections to sufficiently stretch your hair, do it – you’ll thank yourself later.

Ocean Cornrow

Section off the hair around the circumference of your head (about 2 inches) and clip it – this would be the neglect. It’s important to leave some of your hair out, especially if you want to pull your hair up into a ponytail or try half up and half down hairstyles.

If you can’t braid in every direction, you can make one braid that goes around your head or create several braids.

If you want a medium, side, or deep side part, make sure you part your hair accordingly and braid it. You will be attaching the microlinks to the rest of your hair (the non-braided part).

Install Microlinks using the I-Tip method

Now for the best part – install your microlinks! The installation process is not difficult by any means, but it can be a problem for beginners. To ensure a smooth process, follow the instructions below.

  1. Create a horizontal part above the braid at the back of your neck using a rat tail comb. The part should be about an inch high and extend from the strand on the left to the strand on the right.
  2. Secure the rest of your loose hair with a hair tie.
  3. Start by separating the one-inch boxes along the row. After parting each box, pass your hair through one of the microlink beads using the tension hook needle. By the end of this step, you should have a row of box-shaped parts with micro-ties attached.
  4. Pick one of the sections, push the top of the extension strand into the microbead, then attach the bead to the pliers. This will ensure the extension of the hair. Repeat this in each section of the row.
  5. Repeat steps 1 through 4 for all of your natural hair loss.
  6. Style your hair and extensions as desired.

Install Microlinks Braidless Sew-in

Another popular way that women use microlinks is to sew without braiding. Below are the instructions for this installation technique.

  1. Using a rat tail comb, make a horizontal part over the braid at the back of your neck.
  2. Use a hair tie to keep the rest of your loose hair out of the way.
  3. Hold the weft extensions up to the part you just made and measure the length from one end to the other.
  4. Cut the weft so that it is the same length as your part.
  5. Hold the weft extensions to the part again and clip each end of the extensions in place.
  6. Starting at one end of the row, use a rat tail comb to lift a 1-inch section of extensions along with some natural hair below the weft.
  7. Use the pull hook needle to thread the part you just lifted through the microbead.
  8. Use pliers to hold the microbead.
  9. Repeat steps 6 through 8 across the weft – you’ll have anywhere from 4 to 8 microbeads for a row.
  10. If you want to add more thickness to the final look, cut another weft to the same length, place it directly on top of that weft, and sew the two together with a curved needle and weave thread.
  11. Repeat steps 1-10, moving up until you have no choppy hair left (besides leaving you out).
  12. Don’t be afraid to vacation and style as desired.

How to remove Microlinks

What to do and what to avoid from Microlinks

While the instructions above are pretty straightforward, there are some nuances that you should definitely be aware of. Let’s explore the do’s and don’ts in the thumbnail links below.


  • When performing I-Tip extensions, secure the microbead close to the bottom line, otherwise your extensions will not lay flat.
  • Always prepare your hair before installing microlinks.
  • Make sure your hair is free of greasy products before installing.


  • Do not install Microlink Extensions on weak or damaged hair. Doing so can cause further damage and Ultimate fracture.
  • Don’t wear microlinks for longer than 4 to 6 weeks at a time if you want to keep your hair healthy.
  • Don’t install microbeads near your scalp, where they can pull your hair out and even break it at the root.
  • Don’t be afraid to skip rows when installing microlinks or sewing a braid. If the end result is too voluminous, you will not be able to achieve a natural-looking result.

Frequently Asked Questions

How long does Microlinks take?

It usually takes a stylist two to three hours to install micro bead hair extensions, but the time taken may vary. This length of time also depends on how much hair is being fixed.

How to sleep with Microlinks

When sleeping with microlink hair extensions, you can choose a style like braided braids or a ponytail, which will limit the movement of your hair enough to protect the ties from falling out and breaking during the night. You can also wrap your hair in a satin scarf or bonnet.

How harmful are microlinks?

Microlink hair extensions do not require the use of heat, adhesives, or other chemicals, so when properly attached, your natural hair should be fine as long as the extensions are too heavy.

What can replace Microlinks?

If you’re not a good candidate for micro ties or aren’t sure about making a financial commitment, there are still options. We recommend trying tape extensions, sewing accessoriesClip attachments.

How much do microlinks cost?

Prices for micro hair extensions vary with stylists, salons, quality of bundles, location and work required to achieve the desired result. Costs can range from $300 to $1,000. Services like hair dyeing, cutting, and other extras can increase these prices as well.

What is the Metowi method?

For over twenty years, Metowi Willingham has been one of the most sought-after hairdressers in the world. With her passion for hair extensions and 12 years of experience as a business owner, her expertise is rooted in these aspects. The Metowi method is a technology that focuses on the health and retention of your hair’s natural texture. click here To learn more about the Metowi method.

How close is Microlinks to LA Weave?

The LA weave is a no-braid weave that consists of a line of loops sewn close to the scalp, then hair extensions added. A section of hair is passed through each small loop and then pressed into place with pliers. In the weft method, the hair is initially sewn on the tracks.

How many Microlinks are needed to make a full head?

A full head of extensions will require approximately 200-300 strands. Half of the head will require 100-150 strands.

How long do Microlinks last?

Microlink hair extensions can last 10 to 12 weeks, depending on care and maintenance. It is critical that you take care of your hair while wearing extensions to reduce the possibility of potential damage.


Microlinks are Wig Extensions Which attaches to your hair strands with small silicone beads. They last for several weeks before they need to be removed or replaced, and one of their main appeals is that they are almost impossible to spot after installation creating a very natural look.

The The extensions blend well With human hair and can be used on any hair type, including relaxed, curly and curly hair types.

If you are looking for a more versatile option than traditional weaves but less work than installing clip attachments, we hope this article has provided you with all the information you need to install microlinks properly. We wish you success in all your hairdressing endeavors!

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button